bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Keystone RV Trim


  • Replacement Trim Needed for Underside Panel on a 2019 Grand Design Momentum 5th Wheel Toy Hauler
  • Hey Kyle! We have a variety of trim pieces for trailers (see attached link) but since the design will vary from trailer to trailer I'll need some dimensions and possibly some photos to see if anything we carry matches what you're needing to replace.
    view full answer...

  • Finding The Correct Entry Door Trim For A 2018 Montana High Country HM381TH
  • We do offer a variety of different trims, and we very well may have the correct trim for the entry door on your 2018 Montana High Country HM381TH. Unfortunately, there is no way for us to cross reference a model of camper to know exactly what size/shape of trim you will need. The best way to find the correct trim is to take a measurement and look at the profile of the current trim. Then we can compare to our stock and see if we have a match. A very common trim that we see on a lot of...
    view full answer...

  • Where is The Measurement For the Trim Panels On RV Propane Gas Detector # RS64FR Taken?
  • The dimensions for the trim plates included with the RV Propane Gas Detector # RS64FR are taken at the longest and widest points of each cover so the larger bracket is 7-1/4" long and 3-3/8" wide at the furthest points. The same for the size of the smaller bracket at 5-3/4" long and 4-1/4" wide.
    view full answer...

  • What Are the Overall Dimensions of the 48" x 42" MORryde RV Cargo Sliding Tray
  • Hey Tom! The overall dimensions of the MORryde RV Cargo Sliding Tray - 48" x 42" # MR73FR are 48" long x 42" wide x 6-5/8" tall (see attached) - this is for the tray and the rails when they are assembled and installed together. Since this is a bit longer than what works for you I recommend picking up the Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly # LC370782 and pairing it with the Tray Trim Kit # LC370690 which gives you more of a custom setup that will fit within...
    view full answer...

  • Replacement for a Apollo Half-Time Convection Oven
  • Thanks for the picture! In order to recommend a replacement I am going to need some measurements of your Apollo Half-Time Convection Oven. The High Pointe RV item # HP99ZR you were looking at might fit depending on the cut out dimensions for your microwave. It measures 20-1/2" wide x 14-3/4" tall x 18-11/16" deep and has a trim width of 24". If you could email me the dimensions or comment in the box below of your microwave or cut out I would be happy to make a specific recommendation for you.
    view full answer...